New Zealand
Level 6 - NCEA Level 1

# Rotations on Cartesian Plane

Lesson

## Rotations

As we saw in the previous lesson on Turns, a rotation occurs when we turn an object or shape around a central point.  On the Cartesian plane we usually rotate about the origin, $\left(0,0\right)$(0,0). The object is exactly the same shape and size, just rotated around (like going in a circle). Every point on the object or shape has a corresponding point on the image.

Commonly we describe rotations using a degree measure, and as being either clockwise or anticlockwise.

In this example, the image is rotated around the origin by 90 clockwise.

Note how each point creates a 90 degree angle with the origin.

$\left(1,3\right)$(1,3) becomes $\left(3,-1\right)$(3,1)

$\left(3,1\right)$(3,1) becomes $\left(1,-3\right)$(1,3)

$\left(3,4\right)$(3,4) becomes $\left(4,-3\right)$(4,3)

Generally speaking we can see that for a rotation of $90$90 degrees clockwise, that the $\left(a,b\right)$(a,b) becomes $\left(b,-a\right)$(b,a).

Using the applet below you might like to investigate what happens for rotations of 90°, 180°, 270°, and 360° in both clockwise and anticlockwise directions.

Let's have a look at these worked examples.

##### Question 1

What is the correct image after Q is rotated $270^\circ$270° clockwise about the origin?

##### Question 2

a) Graph the points A$\left(5,5\right)$(5,5), B$\left(9,5\right)$(9,5), C$\left(9,9\right)$(9,9) and D$\left(5,9\right)$(5,9).

b) Now plot the points A', B', C' and D' that would result when we rotate the original points A, B, C and D $90^\circ$90° clockwise.

##### Question 3

a) Plot the points A$\left(-5,-5\right)$(5,5), B$\left(-1,-5\right)$(1,5), C$\left(-1,-1\right)$(1,1) and D$\left(-5,-1\right)$(5,1).

b) Now plot the points A', B', C' and D' that would result when we rotate the original points A, B, C and D $90^\circ$90° anticlockwise.

### Outcomes

#### GM6-8

Compare and apply single and multiple transformations

#### GM6-9

Analyse symmetrical patterns by the transformations used to create them

#### 91034

Apply transformation geometry in solving problems