topic badge

7.05 Definite integrals and the area under a curve

Lesson
In the previous lesson, we explored approximating areas under curves using familiar geometric shapes and the trapezoidal rule. In this lesson we will show how integration can be used to calculate the exact area between the horizontal axis, a curve and two bounding values.

The integral and the area

Let's explore the concept of using infinitely many rectangles to determine the area under a curve. If we increase the number of rectangles under a curve the accuracy of the area will also increase. The following applet demonstrates this. You may notice that approximating the area by using rectangles from above and below become closer as we increase the number of rectangles.

 

Let's consider the more generalised case as shown below. Consider some function $y=f\left(x\right)$y=f(x), and let's approximate the area of the function using $n$n rectangles, estimated from above, with all the same width. Then we can label the endpoints of the $i$ith rectangle as $x=x_{i-1}$x=xi1 and $x=x_i$x=xi, where $a=x_0$a=x0, $b=x_n$b=xn, and $x_0x0<x1<x2<<xn describe the endpoints of all $n$n rectangles.

The width of one rectangle is $\Delta x$Δx, and the height of the rectangle is the function evaluated at the left-most $x$x-value of the rectangle, i.e. $f\left(x_{i-1}\right)$f(xi1) for the $i$ith rectangle. Hence the area of one rectangle is given by $f\left(x_{i-1}\right)\Delta x$f(xi1)Δx.

So for $n$n rectangles, and summing together between $a$a and $b$b we get the following approximation for the area under the function:

$f\left(x_0\right)\Delta x+f\left(x_1\right)\Delta x+f\left(x_2\right)\Delta x+\ldots+f\left(x_n\right)\Delta x$f(x0)Δx+f(x1)Δx+f(x2)Δx++f(xn)Δx

We can use sigma notation, i.e. $\sum_{i=1}^n$ni=1 to indicate that we're adding over all the rectangles. This gives us:

$\sum_{i=1}^nf\left(x_{i-1}\right)\Delta x$ni=1f(xi1)Δx

Taking the limit of this expression as $\Delta x\rightarrow0$Δx0 and the number of rectangles, $n$n, increases, we get:

Total area under function $=$= $\lim_{\Delta x\rightarrow0}\ \sum_{i=1}^nf\left(x_{i-1}\right)\Delta x$limΔx0 ni=1f(xi1)Δx

 

The process of integration represents finding the limit of the sum of the areas under a curve as$\Delta x\rightarrow0$Δx0 between $a$a and $b$b. Including the boundary values $a$a and $b$b as a subscript and superscript respectively, we can replace the limit and sum notation with $\int_a^b$ba. $\Delta x$Δx is infinitesimally small, so we use the notation $dx$dx. The area under a curve between $a$a and $b$b is given by:

 

This is called a definite integral and can be stated in words as the integral between $a$a and $b$b of $f(x)$f(x) with respect to $x$x. For simplicity, we will focus on functions that must be continuous between $a$a and $b$b and at this stage we will only consider areas entirely above the $x$x-axis. In the following sections, we will investigate how definite integrals can be calculated.

Geometric solutions to definite integrals

Integrals in the form $\int_a^b\ f(x)\ dx$ba f(x) dx can be solved using geometrical methods if the area forms a known geometrical shape.

Worked examples

Example 1

Solve $\int_1^3\ x\ dx$31 x dx using geometric methods.

Think: This integral means find the area between the function $f(x)=x$f(x)=x and the $x$x axis between $x=1$x=1 and $x=3$x=3.

The image below shows this area:

The shaded area forms a trapezium with $h=2$h=2 and lengths of the parallel sides equivalent to the function values at $x=1$x=1 and $x=3$x=3 which are $1$1 and $3$3 respectively.

Do: Using the formula for the area of a trapezium:

Area $=$= $\frac{h}{2}(a+b)$h2(a+b)
Area $=$= $\frac{2}{2}(1+3)$22(1+3)
Area $=$= $4$4 units2

Therefore:

$\int_1^3\ x\ dx$31 x dx $=$= $4$4
Example 2

Solve $\int_0^2\ \sqrt{4-x^2}\ dx$20 4x2 dx using geometric methods.

Think: This integral means find the area between the function $f(x)=\sqrt{4-x^2}$f(x)=4x2 and the $x$x axis between $x=0$x=0 and $x=2$x=2.

The image below shows this area:

The function forms a semicircle with radius $2$2. The shaded area covers a quarter of the area of the circle.

Do: Using the formula for the area of a circle:

Area $=$= $\frac{1}{4}\pi r^2$14πr2
Area $=$= $\frac{1}{4}\pi2^2$14π22
Area $=$= $\pi$π units2

Therefore:

$\int_0^2\ \sqrt{4-x^2}\ dx$20 4x2 dx $=$= $\pi$π

 

Note that with the methods currently available to us, we are able to solve this integral. It is good practice to consider all solution strategies available to us when solving area problems like this.

Practice questions

Question 1

Find the exact value of $\int_1^8\left(10-x\right)dx$81(10x)dx geometrically.

Loading Graph...

Question 2

Find the exact value of $\int_{-6}^6\sqrt{36-x^2}dx$6636x2dx geometrically.

Loading Graph...

The fundamental theorem of calculus

Of course, not all areas under curves form known geometrical shapes. The process of integration provides a method to calculate the exact area between most functions and an axis. The fundamental theorem of calculus links differentiation and integration and has two parts.

The first part states that integration is the opposite of differentiation and hence implies the existence of the anti-derivative for continuous functions. The second part of the theorem links the algebraic process of anti-differentiation to the geometrical interpretation of integration. It states that an integral for a given interval can be computed by evaluating the difference in the value of the primitive function at the endpoints of the interval.

The fundamental theorem of calculus

Let $f\left(x\right)$f(x) be a function over the interval $\left[a,b\right]$[a,b].

Part $1$1:

If $f\left(x\right)$f(x) is continuous, then the function $F(x)$F(x) defined below is continuous and is a primitive of $f\left(x\right)$f(x):

$F\left(x\right)=\int_a^x\ f(t)\ dt$F(x)=xa f(t) dt and $F'(x)=\frac{d}{dx}\int_a^x\ f(t)\ dt=f(x)$F(x)=ddxxa f(t) dt=f(x)

Part $2$2:

For a function $f(x)$f(x) over a closed interval $\left[a,b\right]$[a,b]:

$\int_a^b\ f(x)\ dx=F(b)-F(a)$ba f(x) dx=F(b)F(a), where $F(x)$F(x) is a primitive of $f(x)$f(x).

Let's look at how this can be used to calculate some areas of simple functions.

Consider the area formed by the $x$x-axis, the function $f(x)=x$f(x)=x between $x=1$x=1 and $x=3$x=3. This area is represented by the shaded region in the image below.

We solved this in example 1 using geometrical methods and obtained an area of $4$4. Let's now calculate the same area using the fundamental theorem of calculus.

In this case, our interval ranges between $x=1$x=1 and $x=3$x=3. Hence, $a=1$a=1and $b=3$b=3. Therefore the integral can be set up as follows:

Area $=$= $\int_a^b\ f(x)\ dx$ba f(x) dx
Area $=$= $\int_1^3\ x\ dx$31 x dx
 

The next step is to calculate the primitive function $F(x)$F(x). We need to introduce some new notation at this stage. This involves enclosing the primitive function in square brackets and placing the values of $a$a and $b$b as a subscript and superscript respectively to the of the right square bracket.

$\int_1^3\ x\ dx$31 x dx $=$= $\left[\frac{x^2}{2}\right]_1^3$[x22]31
 

The square bracket is then resolved by substituting the boundaries values and subtracting the function value at the lower boundary from the function value at the upper boundary. Note that a constant $C$C is not included in the primitive function as it will cancel out when we subtract the function values from each other.

$\int_1^3\ x\ dx$31 x dx $=$= $\left[\frac{x^2}{2}\right]_1^3$[x22]31
  $=$= $\left[\frac{3^2}{2}-\frac{1^2}{2}\right]$[322122]
  $=$= $\left[4.5-0.5\right]$[4.50.5]
  $=$= $4$4 units2

 

Hence, we correctly calculated the same area as the geometrical method. While this may seem initially more complicated, it is very useful when geometrical methods can't be used.

Worked example

Example 4

Find the area enclosed by the function $f(x)=x^2+2$f(x)=x2+2 and the $x$x-axis between $x=2$x=2 and $x=3$x=3.

Think: As this is a non-linear function we will need to use integration to find the area.

Do: The image below shows the area required.

All function values are positive. therefore we can set up our integral to find the area as follows:

$Area$Area $=$= $\int_2^3\ x^2+2\ dx$32 x2+2 dx
 

Finding the primitive function and solving:

Area $=$= $\left[\frac{x^3}{3}+2x\right]_2^3$[x33+2x]32
  $=$= $\left[(\frac{3^3}{3}+2\times3)-(\frac{2^3}{3}+2\times2)\right]$[(333+2×3)(233+2×2)] (substituting $x=2$x=2 and $x=3$x=3)
  $=$= $\left[15-\frac{20}{3}\right]$[15203]
  $=$= $\frac{25}{3}$253 units2

Practice questions

Question 3

Find the exact area of the shaded region under the curve $y=6x^2$y=6x2.

Loading Graph...

Question 4

Find the exact area of the shaded region under the curve $y=x^2+6$y=x2+6.

Loading Graph...

Proof of part $1$1 of the fundamental theorem of calculus

The first part of the fundamental theorem of calculus says that the rate of change of the area function is the same as the function being integrated. That is:

$\frac{d}{dx}\int_a^x\ f(t)\ dt=f(x)$ddxxa f(t) dt=f(x)

Let's look at a geometric proof of this.

Consider the area under the curve $y=f(x)$y=f(x) defined as a function $A(x)$A(x), bounded by the horizontal axis, starting at $a$a and ending at $x$x. This is represented by the blue shaded area above. That is $A(x)=\int_a^xf\left(t\right)dt$A(x)=xaf(t)dt.

Now, let's consider adding an additional area, with width $h$h shown above in red. Using our area function we can define the total area (blue $+$+ red) as:

$A(x+h)$A(x+h)

The red portion can be calculated using:

$A_{red}=A(x+h)-A(x)$Ared=A(x+h)A(x)

As $h$h is very small, we can also approximate this area by treating it as a rectangle, hence:

$A_{red}\approx hf(x)\approx A(x+h)-A(x)$Aredhf(x)A(x+h)A(x)

Dividing throughout by $h$h we get:

$f(x)\approx\frac{A(x+h)-A(x)}{h}$f(x)A(x+h)A(x)h

Taking the limit of this expression as $h\rightarrow0$h0 we get:

$f(x)=\lim_{h\rightarrow0}\frac{A(x+h)-A(x)}{h}$f(x)=limh0A(x+h)A(x)h

Thinking back to differentiation by first principles, the limit expression represents $A'(x)$A(x) and therefore, we can write:

$f(x)=A'(x)$f(x)=A(x)

Which is what we wanted to prove.

Practice questions

Question 5

Calculate $\frac{d}{dx}\int_{13}^x\left(\frac{3}{t^2}-\frac{4}{t^3}\right)dt$ddxx13(3t24t3)dt.

Signed areas and integration

Up to this point, we have only considered the calculation of definite integrals in regions where all function values are positive. Let's now look at functions that have all negative values in the region of integration.

Consider the integral of $f(x)=x^2+2x-3$f(x)=x2+2x3 between $x=-3$x=3and $x=1$x=1:

We can see this area is completely below the horizontal axis. Setting up the integral we get:

Area $=$= $\int_{-3}^1\ x^2+2x-3\ dx$13 x2+2x3 dx
 

Finding the primitive function and solving:

Area $=$= $\left[\frac{x^3}{3}+x^2-3x\right]_{-3}^1$[x33+x23x]13
  $=$= $\left[(\frac{1^3}{3}+1^2-3(1))-(\frac{(-3)^3}{3}+(-3)^2-3(-3))\right]$[(133+123(1))((3)33+(3)23(3))]
  $=$= $\left[(\frac{1}{3}+1-3)-(-9+9+9)\right]$[(13+13)(9+9+9)]
  $=$= $-\frac{5}{3}-9$539
  $=$= $-\frac{32}{3}$323
 

We can see that the value of the definite integral is negative, this is called the signed area. Area, however, can't be negative and is equivalent to the absolute value of the integral in this case. That is, area is $\frac{32}{3}$323 units2.

Careful!

When we are asked to evaluate a definite integral over a given interval, it may include areas above the and below the horizontal axis which will be positive and negative respectively. Evaluation of definite integrals gives the signed area, that is, the sum of all the positive and negative areas (signed areas) over the interval of integration.

However, when we are asked to calculate areas between a curve and an axis, we are not being asked for the signed area. We must either take the absolute value of each area section or multiply areas below the axis by a negative to make them positive and then add them together to get the total. We will look at this in more detail in a future lesson.

Practice questions

Question 6

Calculate $\int_{-4}^2x\left(x-4\right)dx$24x(x4)dx.

Question 7

Answer the following questions:

  1. Calculate $\int_{-2}^4\left(2x-8\right)dx$42(2x8)dx.

  2. Hence determine the area bounded by the line $y=2x-8$y=2x8, the $x$x-axis and the bounds $x=-2$x=2 and $x=4$x=4.

Outcomes

MA12-3

applies calculus techniques to model and solve problems

MA12-7

applies the concepts and techniques of indefinite and definite integrals in the solution of problems

What is Mathspace

About Mathspace