We have seen that the first derivatives of a function have been shown to give us a wealth of information about the shape of the curve. Combining this with the previous understanding of functions, such as domain and range, properties of polynomials, features of exponential and trigonometric functions, we are able to create a checklist of skills that allow us to sketch many functions that are familiar and unfamiliar.
Strategy | Description |
---|---|
Determine any special characteristics |
Investigate values of $x$x for which $f\left(x\right)$f(x) is not defined, such as within fractions or square root functions. Check if there are any asymptotes or discontinuities. |
Domain and range |
Consider the $x$x and $y$y values that the function can take. If a domain is specified, clearly indicate the coordinates of the end points on the function sketch. |
Find axis intercepts |
Let $x=0$x=0 to find the $y$y-intercept, and let $y=0$y=0 and solve to find any $x$x-intercepts, where possible. |
Determine stationary points | Consider $\frac{dy}{dx}=0$dydx=0. |
Determine the nature of stationary points |
Consider $\frac{dy}{dx}$dydx left and right of each stationary point. |
Limiting behaviours |
Consider the graphs behaviour as $x$x approaches $\pm\infty$±∞. Also consider the graphs behaviour about any asymptotes, if the graph has any. (See below for further detail) |
Create a sketch with clearly labelled and appropriately scaled axes, as well as labelling all key features. When available make effective use of technology to help sketch a function.
When sketching curves it is useful to consider what happens to the function as $x\rightarrow\pm\infty$x→±∞. This gives us an indication of what the graph is doing as $x$x gets very large ($x\rightarrow\infty$x→∞) and very small ($x\rightarrow-\infty$x→−∞). Also, if we have identified any asymptotes in the graph, it is important to consider the behaviour of the graph as it approaches critical values.
$n$n | $a>0$a>0 | $a<0$a<0 |
---|---|---|
Even |
||
Odd |
For the function $f\left(x\right)=\left(x-5\right)\left(x-2\right)\left(x+3\right)$f(x)=(x−5)(x−2)(x+3):
a) Find the axes intercepts.
Think: Find the intercepts by letting the opposite variable equal to zero and solve. The cubic is already factorised so we can use the null factor law to solve for the $x$x-intercepts.
Do:
Find the $y$y-intercept: When $x=0$x=0:
$f\left(0\right)$f(0) | $=$= | $\left(0-5\right)\left(0-2\right)\left(0+3\right)$(0−5)(0−2)(0+3) |
$=$= | $30$30 |
Thus, the $y$y-intercept is $\left(0,30\right)$(0,30).
Find the $x$x-intercepts: Solving $f\left(x\right)=0$f(x)=0:
$\left(x-5\right)\left(x-2\right)\left(x+3\right)=0$(x−5)(x−2)(x+3)=0
As the function is in factored form we can see the solutions are $x=5$x=5, $2$2 and $-3$−3. So the $x$x-intercepts are $\left(5,0\right)$(5,0), $\left(2,0\right)$(2,0) and $\left(-3,0\right)$(−3,0).
b) Find the location and nature of any turning points.
Think: We need to find the derivative, solve for $f'\left(x\right)=0$f′(x)=0 and then determine the nature of the turning points. This can be achieved using calculus and testing the gradient either side of the critical points. Alternatively, we can use our knowledge of the shape of the type of polynomial we have.
Do: Expanding $f\left(x\right)$f(x) we obtain:
$f\left(x\right)$f(x) | $=$= | $\left(x-5\right)\left(x-2\right)\left(x+3\right)$(x−5)(x−2)(x+3) |
$=$= | $\left(x-5\right)\left(x^2+x-6\right)$(x−5)(x2+x−6) | |
$=$= | $x^3-4x^2-11x+30$x3−4x2−11x+30 | |
Hence, $f'\left(x\right)$f′(x) | $=$= | $3x^2-8x-11$3x2−8x−11 |
Solving $f'\left(x\right)=0$f′(x)=0:
$3x^2-8x-11$3x2−8x−11 | $=$= | $0$0 |
$\left(3x-11\right)\left(x+1\right)$(3x−11)(x+1) | $=$= | $0$0 |
$\therefore x$∴x | $=$= | $\frac{11}{3}$113 or $-1$−1 |
Substituting these values into $f\left(x\right)$f(x) we obtain $f\left(\frac{11}{3}\right)=-\frac{400}{27}\approx-14.8$f(113)=−40027≈−14.8 and $f\left(-1\right)=36$f(−1)=36. So we have two stationary points at $\left(\frac{11}{3},-\frac{400}{27}\right)$(113,−40027) and $\left(-1,36\right)$(−1,36).
Using calculus to test the behaviour of the derivative either side and between these two points. Choose convenient $x$x-values before $x=-1$x=−1, (such as $x=-2$x=−2), between $x=-1$x=−1 and $\frac{11}{3}$113 (such as$x=0$x=0) and after $x=\frac{11}{3}$x=113 (such as $x=4$x=4). Substitute the values into the gradient function - we are concerned with the sign and whether the function is increasing or decreasing, so you can choose to simply record the sign in the table and not include the value.
$x$x | $-2$−2 | $-1$−1 | $0$0 | $\frac{11}{3}$113 | $4$4 |
---|---|---|---|---|---|
$f'\left(x\right)$f′(x) | $17$17 | $0$0 | $-11$−11 | $0$0 | $5$5 |
sign |
$+$+ | $0$0 | $-$− | $0$0 | $+$+ |
shape |
|
The table shows that at $x=-1$x=−1 the graph changes from increasing to decreasing and hence, $\left(-1,36\right)$(−1,36) is a maximum. And at $x=\frac{11}{3}$x=113 the graph changes from decreasing to increasing and hence, $\left(\frac{11}{3},-\frac{400}{27}\right)$(113,−40027) is a minimum.
As mentioned, we could alternatively use information about the type of graph we have to ascertain which stationary point is maximum and which is minimum. This method can be more efficient for familiar polynomial functions. Here we have a cubic and with the brackets expanded we see that we have a positive leading coefficient. This tells us the general shape of the graph with the tails of the function going from bottom left to top right. Thus, the point to the left,$\left(-1,36\right)$(−1,36), will be the maximum and the second point,$\left(\frac{11}{3},-\frac{400}{27}\right)$(113,−40027), will be the minimum.
c) Use the information to sketch the function.
Think: Given the points found, think of an appropriate scale to show the key features. Then plot each of the points we have and sketch in a smooth curve connecting them to obtain the graph.
Do:
Consider the function $f\left(x\right)=\left(4x+5\right)^2\left(x-1\right)$f(x)=(4x+5)2(x−1).
Solve for the $x$x-value(s) of the $x$x-intercept(s).
Determine an equation for $f'\left(x\right)$f′(x).
Hence solve for the $x$x-coordinate(s) of the stationary point(s).
Determine an equation for $f''\left(x\right)$f′′(x).
Select all correct statements about the stationary points of this function.
$\left(\frac{1}{4},-27\right)$(14,−27) is a maximum turning point.
$\left(\frac{1}{4},-27\right)$(14,−27) is a minimum turning point.
$\left(-\frac{5}{4},0\right)$(−54,0) is a maximum turning point.
$\left(-\frac{5}{4},0\right)$(−54,0) is a minimum turning point.
Sketch a graph of the function below.
Consider the function $f\left(x\right)=\left(x^2-4\right)^2+4$f(x)=(x2−4)2+4.
State the coordinates of the $y$y-intercept.
Give your answer in the form $\left(a,b\right)$(a,b).
Determine an equation for $f'\left(x\right)$f′(x).
Hence solve for the $x$x-coordinate(s) of the stationary point(s).
If there is more than one, write all of them on the same line separated by commas.
By completing the tables of values, find the gradient of the curve at $x=-2.5$x=−2.5, $x=-1.5$x=−1.5, $x=-0.5$x=−0.5, $x=0.5$x=0.5, $x=1.5$x=1.5 and $x=2.5$x=2.5.
$x$x | $-2.5$−2.5 | $-2$−2 | $-1.5$−1.5 |
---|---|---|---|
$f'\left(x\right)$f′(x) | $\editable{}$ | $0$0 | $\editable{}$ |
$x$x | $-0.5$−0.5 | $0$0 | $0.5$0.5 |
---|---|---|---|
$f'\left(x\right)$f′(x) | $\editable{}$ | $0$0 | $\editable{}$ |
$x$x | $1.5$1.5 | $2$2 | $2.5$2.5 |
---|---|---|---|
$f'\left(x\right)$f′(x) | $\editable{}$ | $0$0 | $\editable{}$ |
Select the correct statements.
$\left(2,4\right)$(2,4) is a maximum turning point.
$\left(0,20\right)$(0,20) is a maximum turning point.
$\left(-2,4\right)$(−2,4) is a minimum turning point.
$\left(0,20\right)$(0,20) is a minimum turning point.
$\left(2,4\right)$(2,4) is a minimum turning point.
$\left(-2,4\right)$(−2,4) is a maximum turning point.
Draw the graph below.
Consider the function $f\left(x\right)=e^{2x}\sin3x$f(x)=e2xsin3x.
Find $f'\left(x\right)$f′(x).
For what value of $\tan3x$tan3x is $f'\left(x\right)=0$f′(x)=0?
The graph of $f\left(x\right)$f(x) is shown below.
Find the $x$x-values of the $x$x-intercepts $B$B and $C$C.
Solve for the $x$x-coordinate of $A$A to two decimal places.