topic badge
iGCSE (2021 Edition)

22.03 Frequency tables

Lesson

One common way of collecting data is through a survey. Conducting a survey involves choosing a question to ask and then recording the answer. This is great for collecting information, but at the end we are left with a long list of answers that can be difficult to interpret.

This is where tables come in. We can use tables to organise our data so that we can interpret it at a glance.

 

Tables, frequencies and modes

When conducting a survey, the three main steps are:

  1. Gathering the data
  2. Organising the data
  3. Interpreting the data

We looked at what questions we should ask when gathering different types of data. Now we are going to look at how tables can be used to help us organise and interpret those data.

Exploration

Suppose that Melanie wanted to find the least common colour of car in her neighbourhood. To help her find an answer to this, she conducted a survey by observing the colours of the cars passing through her street.

By sitting in front of her house and recording the colour of the first $20$20 cars that drove past, Melanie obtained the following data:

 

white, black, white, black, black, blue, blue, white, red, white,

white, blue, orange, blue, white, white, orange, red, blue, red

 

In order to better interpret her data, Melanie converted this list of colours into a frequency table, counting the number of cars corresponding to a particular colour and writing that number in the frequency column next to that colour.

Car colour Frequency
Red $3$3
Black $3$3
White $7$7
Orange $2$2
Blue $5$5

Looking at her table, Melanie found that orange was the least common car colour in her neighbourhood as it had the lowest frequency.

 

Frequency

The frequency of a result is the number of times that it appears in the list of data.

 

Melanie has answered her initial question, but she realises she can use the same data to answer other questions about the colours of cars in her neighbourhood.

a) What fraction of the cars were black?

We can read from the table that $3$3 cars were black. Since Melanie recorded the colour of $20$20 cars, this means that $3$3 out of $20$20 of the cars were black. We can express this as the fraction $\frac{3}{20}$320.

b) What was the most common colour of car?

Looking at the table, we can see that the result with the highest frequency is the colour white, so this was the most common colour. This means that the mode of the data is "white".

 

Mode

The mode of a data set is the result with the highest frequency.

If there are multiple results that share the highest frequency then there will be more than one mode.

 

Frequency tables

When representing the frequency of different results in our data, we often choose to use a frequency table.

 

Frequency table

A frequency table communicates the frequency of each result from a set of data. This is often represented as a column table with the far-left column describing the result and any columns to the right recording frequencies of different result types.

As seen in the exploration, frequency tables can help us find the least or most common results among categorical data. They can also allow us to calculate what fraction of the data a certain result represents.

When working with numerical data, frequency tables can also help us to answer other questions that we might have about how the data are distributed.

Practice question

Question 1

Thomas conducted a survey on the average number of hours his classmates exercised per day and displayed his data in the table below.

No. exercise hours Frequency
$0$0 $2$2
$1$1 $12$12
$2$2 $7$7
$3$3 $5$5
$4$4 $0$0
$5$5 $3$3
  1. How many classmates did Thomas survey?

  2. What is the mode of the data?

  3. How many classmates exercised for less than three hours?

  4. How many classmates exercised for at least three hours?

 

In the practice question above, Thomas found that there were no classmates who exercised for $4$4 hours. Instead of leaving the frequency blank, Thomas put $0$0 as the frequency. If he had left this information out of the table then we would not know how many classmates fit this category.

To calculate the total number of data points we add up all the frequencies. Then to calculate the total for "less than" some number, we add up the frequencies for the results that are less than that number. Similarly, when calculating the total for "at least" some number, we add up the frequencies that are more than or equal to that number.

 

Grouped frequency tables

When the data are more spread out, sometimes it doesn't make sense to record the frequency for each separate result and instead we group results together to get a grouped frequency table.

 

Grouped frequency table

A grouped frequency table combines multiple results into a single group. We can find the frequency of a group by adding all the frequencies of the results contained in that group.

Exploration

A teacher wants to express the heights (in cm) of her students in a table using the following data points:

 

$189,154,146,162,165,156,192,175,167,174$189,154,146,162,165,156,192,175,167,174

$161,153,184,177,155,192,169,166,148,170$161,153,184,177,155,192,169,166,148,170

$168,151,186,152,195,169,143,164,170,177$168,151,186,152,195,169,143,164,170,177

 

She realises that if each result has its own frequency then the table would have too many rows, so instead she grouped the results into sets of $10$10 cm. As a result, her grouped frequency table looked like this:

Height (cm) Frequency
$140-149$140149  
$150-159$150159  
$160-169$160169  
$170-179$170179  
$180-189$180189  
$190-199$190199  

To fill in the frequency for each group, the teacher counted the number of results that fell into the range of each group.

For example, the group $150-159$150159 would include the results:

$154,156,153,155,151,152$154,156,153,155,151,152

Since there are $6$6 results that fall into the range of this group, this group has a frequency of $6$6.

Using this method, the teacher filled in the grouped frequency table to get:

Height (cm) Frequency
$140-149$140149 $3$3
$150-159$150159 $6$6
$160-169$160169 $9$9
$170-179$170179 $6$6
$180-189$180189 $3$3
$190-199$190199 $3$3

Looking at the table, she can see that the modal class is the group $160-169$160169, since it has the highest frequency.

By adding the frequencies in the bottom two rows she could also see that $6$6 students were at least $180$180 cm tall. There are $30$30 students in the class in total, so she now knows that $\frac{6}{30}$630 of her students, or one fifth of the class, are taller than $180$180 cm.

 

Modal class

The modal class in a grouped frequency table is the group that has the highest frequency.

If there are multiple groups that share the highest frequency then there will be more than one modal class.

As we can see, grouped frequency tables are useful when the data are more spread out. While the teacher could have obtained the same information from a normal frequency table, the grouping of the results condensed the data into an easier to interpret form.

However, the drawback of a grouped frequency table is that the data becomes less precise, since we have grouped multiple data points together rather than looking at them individually.

 

Practice questions

Question 2

Yvonne asks $15$15 of her friends what their favourite colour is. She writes down their answer. Here is what she wrote down:

blue, pink, blue, yellow, green, pink, pink, yellow, green, blue, yellow, pink, yellow, pink, pink

  1. Count the number of each colour and fill in the table.

    Colour Number of Friends
    pink $\editable{}$
    green $\editable{}$
    blue $\editable{}$
    yellow $\editable{}$
  2. Which colour is the mode?

    pink

    A

    yellow

    B

    green

    C

    blue

    D
Question 3

A survey of $30$30 people asked them how many video games they had played in the past month. Select true or false for each of the following statements:

Number of video games played Frequency
$0$0$-$$4$4 $5$5
$5$5$-$$9$9 $12$12
$10$10$-$$14$14 $9$9
$15$15$-$$19$19 $4$4
  1. "We know that $25$25 people played $10$10 or more video games."

    True

    A

    False

    B
  2. "We know that $17$17 people played $7$7 or fewer video games."

    True

    A

    False

    B
  3. "$21$21 people played more than $4$4 but less than $15$15 video games."

    True

    A

    False

    B
  4. "The modal class was $5$5-$9$9 video games."

    True

    A

    False

    B

 

Summarising data from a frequency table

We can find the mode, mean, median and range from a frequency table. These will be the same as the mode, mean, median and range from a list of data but we can use the frequency table to make it quicker.

Exploration

Find the mode, mean, median and range of the following data.

Score ($x$x) Frequency ($f$f)
$1$1 $6$6
$2$2 $9$9
$3$3 $1$1
$4$4 $6$6
$5$5 $8$8
$6$6 $6$6
$7$7 $6$6
$8$8 $2$2
$9$9 $8$8

The mode is the score with the highest frequency. Looking at the frequency table, the score $2$2 has a frequency of $9$9 and all of the other scores have a lower frequency. So the mode is $2$2.

To find the mean we add together all of the scores. Since each score occurs multiple times, we can save time by multiplying the scores by the frequencies. Notice that we've assigned the score the pronumeral $x$x and the frequency the pronumeral $f$f. We want to find the product $xf$xf for each score.

Score ($x$x) Frequency ($f$f) $xf$xf
$1$1 $6$6 $6$6
$2$2 $9$9 $18$18
$3$3 $1$1 $3$3
$4$4 $6$6 $24$24
$5$5 $8$8 $40$40
$6$6 $6$6 $36$36
$7$7 $6$6 $42$42
$8$8 $2$2 $16$16
$9$9 $8$8 $72$72

Now if we add up the $xf$xf column, we will get the sum of all of the scores, and if we add up the frequency column we will get the total number of scores. Dividing the two sums will give us the mean.

$\frac{\text{Sum of all scores}}{\text{Total number of scores}}$Sum of all scoresTotal number of scores $=$= $\frac{6+18+3+24+40+36+42+16+72}{6+9+1+6+8+6+6+2+8}$6+18+3+24+40+36+42+16+726+9+1+6+8+6+6+2+8

Using the definition of the mean

  $=$= $\frac{221}{52}$22152

Evaluate the sums

$\frac{\text{Sum of all scores}}{\text{Total number of scores}}$Sum of all scoresTotal number of scores $=$= $4.25$4.25

Evaluate the quotient

To find the median, we can find the cumulative frequency for each score. The cumulative frequency is the sum of the frequencies of the score and each of the scores below it. The cumulative frequency of the first row will be the frequency of that row. For each subsequent row, add the frequency to the cumulative frequency of the row before it.

Score ($x$x) Frequency ($f$f) Cumulative frequency
$1$1 $6$6 $6$6
$2$2 $9$9 $15$15
$3$3 $1$1 $16$16
$4$4 $6$6 $22$22
$5$5 $8$8 $30$30
$6$6 $6$6 $36$36
$7$7 $6$6 $42$42
$8$8 $2$2 $44$44
$9$9 $8$8 $52$52

The final row has a cumulative frequency of $52$52, so there are $52$52 scores in total. This means that the median will be the mean of the $26$26th and $27$27th scores in order.

Looking at the cumulative frequency table, there are $22$22 scores less than or equal to $4$4 and $30$30 scores less than or equal to $5$5. This means that the $26$26th and $27$27th scores are both $5$5, so the median is $5$5.

Finally, we can find the range just by looking at the score column. The highest score is $9$9 and the lowest is $1$1, so the range will be $9-1=8$91=8.

 

 

 

Outcomes

0580C1.16C

Extract data from tables and charts.

0580E1.16C

Extract data from tables and charts.

0580C9.1

Collect, classify and tabulate statistical data.

0580E9.1

Collect, classify and tabulate statistical data.

What is Mathspace

About Mathspace